Drafting Chair with 3 way active Mesh Back

Drafting Chair with 3 way active Mesh Back

The Mesh Back Drafting Chair adapts to your movement with a special seat cushion and active mesh back. The perfect lumbar support is created when you sit down and the mesh back forms to you. The active mesh actually moves with you and responds to your movements. The chair back is height adjustable so you can place it just right for low back and shoulder support. One of the special features is the seat depth control that permits you to change the depth of the seat so you can sit all the way back into the chair and insure proper circulation to your legs. It even let's you adjust the back and seat angle to fit your body and work style.

• Back 19w x 20h
• Seat 20w x 18 to 20.5d, depth adjustable
• Seat Depth adjustment standard
• Height 23-33"
• Memory Cush seat cushion
• Optional height adjustable arms
• Height adjustable foot ring
• Oversized casters for stability
• Weight capacity 300 lbs
• Exceeds ANSI and BIFMA ergonomic standards

Basic Fabrics For Kare Ergonomic Office Chairs

Basic Fabric Group

BASIC 100% Marquesa Lana TECHNICAL SPECIFICATIONS PERFORMANCE TEST METHOD RESULTS Width 54" Abrasion ASTM-D-4157 (Wyzenbeek-Cotton Duck) 250,000 Double Rubs Weight N/A Colorfastness Dry: N/A Backing Acrylic Wet: N/A Finish Teflon Lightfastness AATCC 16E 40 hrs. - Class 4 Approximate Repeat None Seam Slippage Warp N/A Railroaded No Fill: N/A FLAMMABILITY

California Fire Code Technical Bulletin 117, Section E Passes CS-191-53 Passes


Basic Black	Basic Blue Combo


Basic Burgundy	Basic Charcoal


Basic Gray	Basic Navy Blue

Celestial Fabric Group

50% Polyester, 50% Post Industrial Recycled Polyester - Reduced Environmental Impact TECHNICAL SPECIFICATIONS PERFORMANCE TEST METHOD RESULTS Width 54" Abrasion ASTM-D-3597 (Cotton Duck) 150,000 Double RubsWeight N/A Colorfastness Dry: N/A Backing Polyurethane Wet: N/A Finish N/A Lightfastness AATCC 16E 40 hrs. - Class 4.5 Approximate Repeat None Seam Slippage Warp N/A Railroaded No Fill: N/A FLAMMABILITY

California Fire Code Technical Bulletin 117, Section E Passes CS-191-53 Passes


Black Oberon	Rhea Gray


Callisto Earth Tone	Titan Blue


Burgundy Hyperion	Europa Green

Spice Fabric Group

ELEMENTS 50% Polyester, 50% Post Industrial Recycled Polyester - Reduced Environmental Impact TECHNICAL SPECIFICATIONS PERFORMANCE TEST METHOD RESULTS Width 54" Abrasion ASTM-D-3597 (Cotton Duck) 150,000 Double Rubs Weight N/A Colorfastness Dry: N/A Backing Polyurethane Wet: N/A Finish N/A Lightfastness AATCC 16E 40 hrs. - Class 4.5 Approximate Repeat None Seam Slippage Warp N/A Railroaded No Fill: N/A FLAMMABILITY

California Fire Code Technical Bulletin 117, Section E Passes CS-191-53 Passes


Juniper Spice	Mint Spice


Nutmeg Spice	Paprika Spice


Pepper Spice	Sesame Spice

Mesh Back Color Skirts 901, 706, 707 series


Black Echo Park	Silver Sawtelle


Gray Silver Lake	Brown Topanga


Dark Blue Palisades	Teal Blue Malibu


Orange Del Ray	Red Sunset

Green Joshua Tree

Foot Ring Assembly and Adjustment

Prep: Clean Cylinder, Loosen Foot Ring Gasket

Before Assembly: Clean the cylinder thoroughly to remove any grease or oil to provide a good grip. In the loosened position, check to see that Foot Ring is at the top of the central hub by holding onto the black inner gasket and turning the foot ring counter clockwise. (Tip: The inner gasket needs to be loose so you can fit the foot ring over the chair cylinder.)

Assembly: Put Foot Ring On Chair Cylinder

Slide the chair height cylinder into the center opening of the foot ring. Insert the thicker part of the cylinder into the five star base. Insert the thinner part of the cylinder into the chair mechanism attached to the bottom of the chair seat. To engage the pressure seal, sit on the chair and adjust the seat height up and down.

Adjust: Height Of Foot Ring

Hold the plastic inner hub (gasket) of the Foot Ring while you tighten or loosen it. (Tip: If needed, grip the bottom of gasket below foot ring with a cloth and channel locks so you can get a better grip.) Once the Foot Ring is loosened you can move it to the desired height to support the user's legs. Set the height so the user's legs are parallel to the floor or as close as possible. Now you can tighten the Foot Ring. Hold the base with one hand and turn the Foot Ring clockwise to tighten. You may need to hold the bottom of the hub (the black inner gasket) as you turn the Foot Ring in order to get a very tight fit. It is best not to over tighten the Foot Ring

Write Review

Write Your Own Review

How do you rate this product?

Write a headline for your review here:

Write your review here:

Your email:

We promise to never spam you, and just use your email address to identify you as a valid customer.

Enter your name: (optional)

This product hasn't received any reviews yet. Be the first to review this product!