- Dual Monitor Arm with budget price
If you need to raise or lower your monitors this is a budget focused monitor arm that will do the job very nicely. The two monitor arm configuration permits you to correctly place the height of the monitors to reduce postures that cause neck and shoulder discomfort. Easy dual monitor connector controls the monitor height using an allen head screws to adjust height then tighten until secure.
Sturdy construction permits 34 pounds of weight.
The 26.75 inch extension from the back post makes sure the monitors can be positioned close enough to you to eliminate the awkward posture of leaning your head forward.
• Supports two monitors
• Load Capacity: 6.6 to 17.6 lbs
• 16" H back pole
• Allen screws control height adjustment makes for a secure stable height
• Made of high-quality aluminum alloy
• Arm extends 26.75
• Arm retracts to 4” to back post to save space
• Height adjusts from 13.6” to 25.25”
• Both Grommet Mount or Desk Clamp included
• Load capacity up to 17.5 lbs per mounting arm
• Conforms to VESA 75mm and VESA 100mm
• VESA plate quick release, easier to remove or change out monitor
Do you ever find yourself squinting to read your computer screen? And then moments later you notice your neck and shoulders begin to ache? It could be your monitor is too far away forcing you to lean forward, your computer screen is dirty or a glare is blanketing your screen. The most basic ergonomic guideline to follow to prevent eye, neck and shoulder strain is to keep your monitor and documents at eye level, your computer screen clean and glare to a minimum. The top of the monitor screen should be at or slightly below eye level so you can read it without bending your head or neck up or back. Some people position the monitor by tilting it back 10-20 degrees. Be on the lookout for overhead monitor glare. Position the monitor directly in front of you within 18 to 24 inches (approximately arm's length away) from the eyes. Bifocals typically require a lower monitor.
Tip: Notice your body posture while at the computer to get the information on placement. A mirror will give you great feedback.
If you're experiencing eye strain or neck and shoulder tension, it may be that your monitor is too far away causing you to lean forward or the monitor may be too close to you causing you to pull too far back. Position your monitor to the recommended height (at center of monitor or slightly below eye level). By placing the monitor at the proper height and proper depth, you will reduce upper body discomfort. Risers are an easy way to get height adjustment and storage for people sharing workstations. A monitor lift gives you quick adjustability and helps maintain your neutral zone.
Ouch. It hurts when you have to strain your eyes to read, not to mention the pain it causes in your neck when you're reading something on a flat surface. The key to avoiding eye and neck strain is to take documents off of a flat desk surface. For the most comfortable viewing results, place the document holder close to the monitor to minimize head movement and vision refocusing
Glare is often the culprit to blurred vision and headaches. How can you say goodbye to glare? Clean your monitor, adjust brightness and contrast levels, and make certain your monitor isn't backed by or facing a bright window or overhead lights, it is too fatiguing for your eyes. An anti-glare screen will also reduce glare as well as improve screen clarity.
Too light? Too dark? Neutral natural lighting is the key to keeping your vision sharp and headaches at bay. Use an adjustable task light that has a stable base and provides adequate light levels to read smaller print. Your light source should not reflect off of the monitor or shine directly into your eyes.
Monitor Arm Specs 419XXDCWrite Review