Ergo Drafting Chair, Full Adjustments

~~$722.00~~ $415.00

(You save $307.00)

Ask and you will receive: a comfortable drafting chair designed for long hours

If you spend many hours at your drafting table, all you want is a drafting chair that doesn't restrict your movements, your comfort or your posture. Is that too much to ask? At Kare, we don't think so. Stylish, fully adjustable, and just as comfortable as your favorite pair of jeans, our Drafting Chair is the market pacesetter.

We've designed this drafting chair with every ounce of ergonomic knowledge we've gained. From its fingertip adjustments (tilt and height) of the back, lumbar, seat, arm and foot rest, to the plush 3.5" thick medical grade foam cushioning and waterfall seat contour (which takes pressure off your knees), this chair conforms to and supports your body like no other. It is an ahhh ergonomic drafting chair that allows you freedom of movement and hours of productivity through comfort.

Available without arms.
Available with ESD option and ESD arms

• Adjustable foot ring to accommodate various body types and sizes
• Thick, comfortable, cushioned seat
• Back Adjustments: height, forward, backward tilt to 28°
• Independent Seat tilt
• Special stain-resistant DuPont Teflon fabric, grade 1 basic or spice
• Five-star, scuff-resistant base with nylon casters
• Dimensions, back 16 w x 13 h, seat 18 w x 18 d
• Height 23-33
• Available Drafting Chair Heights 21 - 29 or 23 - 33
• Also see model 820SS to include seat depth adjustment
• Rated up to 250 pounds
• 12-year warranty

Basic Fabrics For Kare Ergonomic Office Chairs

Basic Fabric Group

BASIC 100% Marquesa Lana TECHNICAL SPECIFICATIONS PERFORMANCE TEST METHOD RESULTS Width 54" Abrasion ASTM-D-4157 (Wyzenbeek-Cotton Duck) 250,000 Double Rubs Weight N/A Colorfastness Dry: N/A Backing Acrylic Wet: N/A Finish Teflon Lightfastness AATCC 16E 40 hrs. - Class 4 Approximate Repeat None Seam Slippage Warp N/A Railroaded No Fill: N/A FLAMMABILITY

California Fire Code Technical Bulletin 117, Section E Passes CS-191-53 Passes


Basic Black	Basic Blue Combo


Basic Burgundy	Basic Charcoal


Basic Gray	Basic Navy Blue

Celestial Fabric Group

50% Polyester, 50% Post Industrial Recycled Polyester - Reduced Environmental Impact TECHNICAL SPECIFICATIONS PERFORMANCE TEST METHOD RESULTS Width 54" Abrasion ASTM-D-3597 (Cotton Duck) 150,000 Double RubsWeight N/A Colorfastness Dry: N/A Backing Polyurethane Wet: N/A Finish N/A Lightfastness AATCC 16E 40 hrs. - Class 4.5 Approximate Repeat None Seam Slippage Warp N/A Railroaded No Fill: N/A FLAMMABILITY

California Fire Code Technical Bulletin 117, Section E Passes CS-191-53 Passes


Black Oberon	Rhea Gray


Callisto Earth Tone	Titan Blue


Burgundy Hyperion	Europa Green

Spice Fabric Group

ELEMENTS 50% Polyester, 50% Post Industrial Recycled Polyester - Reduced Environmental Impact TECHNICAL SPECIFICATIONS PERFORMANCE TEST METHOD RESULTS Width 54" Abrasion ASTM-D-3597 (Cotton Duck) 150,000 Double Rubs Weight N/A Colorfastness Dry: N/A Backing Polyurethane Wet: N/A Finish N/A Lightfastness AATCC 16E 40 hrs. - Class 4.5 Approximate Repeat None Seam Slippage Warp N/A Railroaded No Fill: N/A FLAMMABILITY

California Fire Code Technical Bulletin 117, Section E Passes CS-191-53 Passes


Juniper Spice	Mint Spice


Nutmeg Spice	Paprika Spice


Pepper Spice	Sesame Spice

Foot Ring Assembly and Adjustment

Prep: Clean Cylinder, Loosen Foot Ring Gasket

Before Assembly: Clean the cylinder thoroughly to remove any grease or oil to provide a good grip. In the loosened position, check to see that Foot Ring is at the top of the central hub by holding onto the black inner gasket and turning the foot ring counter clockwise. (Tip: The inner gasket needs to be loose so you can fit the foot ring over the chair cylinder.)

Assembly: Put Foot Ring On Chair Cylinder

Slide the chair height cylinder into the center opening of the foot ring. Insert the thicker part of the cylinder into the five star base. Insert the thinner part of the cylinder into the chair mechanism attached to the bottom of the chair seat. To engage the pressure seal, sit on the chair and adjust the seat height up and down.

Adjust: Height Of Foot Ring

Hold the plastic inner hub (gasket) of the Foot Ring while you tighten or loosen it. (Tip: If needed, grip the bottom of gasket below foot ring with a cloth and channel locks so you can get a better grip.) Once the Foot Ring is loosened you can move it to the desired height to support the user's legs. Set the height so the user's legs are parallel to the floor or as close as possible. Now you can tighten the Foot Ring. Hold the base with one hand and turn the Foot Ring clockwise to tighten. You may need to hold the bottom of the hub (the black inner gasket) as you turn the Foot Ring in order to get a very tight fit. It is best not to over tighten the Foot Ring

Write Review

Write Your Own Review

How do you rate this product?

Write a headline for your review here:

Write your review here:

Your email:

We promise to never spam you, and just use your email address to identify you as a valid customer.

Enter your name: (optional)

This product hasn't received any reviews yet. Be the first to review this product!