- An ESD Chair with all the ergo controls and wider back and seat. Fits Mid and Large Users
We have taken one of our most popular ergonomic desk chairs and made it ESD. The Kare complete circuit design means every component is grounded and flows all the way down to the floor. Every chair is tested to insure it meets ESD standards before it is shipped. You can trust our ESD chairs to protect you and your equipment from static electric discharge.
Ergonomic adjustments include: independent control over back height and angle, seat depth and height, chair height and arm height. Having independent control of all adjustments makes it easy to create a custom fit that relieves tension and fatigue. Ideal ESD Chair for the mid to large frame bodies.
• Extra Wide seat and upright backrest fits tall athletic bodies
• Dimensions seat 22 w x 18-21d, back 19 w x 22 h, height 17 - 22
• Dial-in adjustable lumbar support customizes comfort
• Sliding seat adjusts from 18 to 21 deep to fit people over 5' 7"
• Stress relieving rocking motion and pivoting
• Backrest forward and backward tilt adjustment
• True waterfall front with 2 layer medical grade foam
• Large 5-star, scuff resistant base with twin casters
• Arm rest features easy adjust pinch grip with wider rest surface
• Rated up to 300 Pound Capacity
• Fits medium and large frame users
• 12-year warranty
Specifications Esd Chairs Fabric and Vinyl Resistivity:
TREK Meter; 20% relative humidity, ohms/sq1.3 x 10 exp 6
Contents 99% Nylon, 1% Carbon Fiber (with Latex Backing)
16.0 ozs. per linear yard Width 54-
State of CA Technical Bulletin 117, Section E Passes UFAC Class 1
Light (AATCC-16A) 40 hrs. min., Class 5 Crocking (AATCC-8) Dry Class 5, Wet Class 5
Weight 26.0 ozs. per linear yard, Width 54 Resistivity: Beckman Megohmeter, 500 volt charge <1 .0 x 10 exp 6 ohms/sq
(ASTM D-4157) 180,000 Double Rubs Seam Slippage (ASTM D-434) Warp 56 lb. Fill 55 lb. Pilling Resistance (ASTM D-3511) Class 5
State of CA Technical Bulletin 117, Section E Passes, MVSS302 Passes
The problems associated with static electricity have become a major issue for many businesses in this high-tech world. The fabrics shown on this card can help serve as conductors which can carry off static charges before sufficient buildup can occur to create the sparking discharge that can cause computer and instrument malfunction. To maximize the conductive properties of these fabrics and achieve proper performance, engineering of the furniture must take into consideration the need for grounding the static charges conducted by the surface materials.
This term and any corresponding data refer to typical performance in the tests indicated and should not be construed to imply the behavior of this or any other material under actual fire conditions.
ESD Fabric Black
ESD Fabric Gray
ESD Fabric Charcoal
ESD Fabric Green
ESD Fabric Red
ESD Fabric Navy Blue
ESD Fabric Blue/Silver
ESD Vinyl Blue
ESD Vinyl Black
Ergonomic Chair Adjustment- How To Adjust Your Chair 1 Floating Backrest
Backrest floats with your body backward and forward. Lock in any position. Sit with your back against backrest, pull up on lever #1 to release. When backrest is in comfortable position release lever #1 to lock in place.
2 Chair Height
Pneumatic seat height adjustments. Locks in any position. Pull up on lever #2 to adjust chair up and down. When the chair is at correct height release handle to lock in place.
3 Rocking Chair Motion
Pull up on lever #3 to unlock seat pan. If seat pan slants forward, lean back to bring seat pan to 0° and roll the Tilt Release Bar lever #4 up to lock seat pan in position. You can now use rocking motion. Refer to step #6 for rocking motion tension adjustment.
4 Seat And Backrest Tilt (Pan Tilt) (Does Not Apply To 800ss)
To allow chair to tilt forward and or backward in a working position, pull up/unlock lever #3, then pull the Tilt Release Bar lever #4 down and backwards. To lock seat pan in position push down on lever #3. When adjusting, sit with your back to backrest for easier control.
5 Backrest Height
Adjust backrest support to fit your needs. Simply lift to raise the backrest to fit your body. To lower you first lifting the back all the way up and permit it to go all the way down to where you can start to ratcheting up again.
6 Seat Tilt Tension
Seat tilt tension adjustment wheel #6. Turn clockwise to decrease tension. It is best to set tension high for best rocking motion. Refer to steps 3 and 4.
7 Sliding Seat
Adjust the depth of your seat pan, pull up lever #7 (lever on left) and scoot your seat either in or out.To lock, release lever.
Lumbar Adjustment (Does not apply to 800SS)Turn knob to increase or decrease the amount of lumbar support.
Two Way Adjustable Arms
Adjust the height of the armrests, turn knob #7 to raise or lower. This knob has 7 different positions, so you can custom fit the chair to your needs. To move the arms in or out simple loosen the screws and position the arms to fit your body. Tighten screw in position.Write Review
Customers also viewed