Additional Information

Site Information

  • Image 1

Heavy Duty Draft Stool

$1,397.00 $803.00
(You save $594.00)
SKU:
778DN
Quantity:
  • Great heavy duty drafting chair that has all the control you need.

    The Heavy Duty Officer's Drafting Chair is built tough and can handle up to 350 pounds. The seat is depth adjustable so it easily adjusts to fit long and short leg users. Coupled with that you can raise the back to fit your lumbar and adjust the angle of the back. This is one of our most popular drafting chairs because of the reinforced memory cushions that reduces sitting fatigue and tissue compression associated with seated work postures. Footring provides flat surface for a more secure resting area for feet. The footring also provides our new knobless height adjustment.
    If you are looking for a drafting height chair for a medium to large frame user then this chair should be seriously considered. It provides all the controls for adjustments and is built to handle intense use. And of course, you will love the comfortable cushions.

    • Rated to 350 lbs
    • Designed for intensive use
    • Full ergonomic control over all angles and height
    • Memory foam added to high resistant medical grade cushions
    • Back 19.5w x 22h, seat 21w x 18-20.5d, height 23-31
    • 7 year Warranty
    • Seat depth adjustment fits different height users
    • Heavy Duty height cylinder
  • Basic Fabrics For Kare Ergonomic Office Chairs
    Basic Fabric Group

    BASIC 100% Marquesa Lana TECHNICAL SPECIFICATIONS PERFORMANCE TEST METHOD RESULTS Width 54" Abrasion ASTM-D-4157 (Wyzenbeek-Cotton Duck) 250,000 Double Rubs Weight N/A Colorfastness Dry: N/A Backing Acrylic Wet: N/A Finish Teflon Lightfastness AATCC 16E 40 hrs. - Class 4 Approximate Repeat None Seam Slippage Warp N/A Railroaded No Fill: N/A FLAMMABILITY

  • California Fire Code Technical Bulletin 117, Section E Passes CS-191-53 Passes

  • Black-1020.jpg
    Blue.jpg

    Basic Black

    Basic Blue Combo

    Burgandy.jpg
    Charcoal.jpg

    Basic Burgundy

    Basic Charcoal

    Gray.jpg
    basic-navy-N04L.jpg

    Basic Gray

    Basic Navy Blue

    Celestial Fabric Group

    50% Polyester, 50% Post Industrial Recycled Polyester - Reduced Environmental Impact TECHNICAL SPECIFICATIONS PERFORMANCE TEST METHOD RESULTS Width 54" Abrasion ASTM-D-3597 (Cotton Duck) 150,000 Double Rubs Weight N/A Colorfastness Dry: N/A Backing Polyurethane Wet: N/A Finish N/A Lightfastness AATCC 16E 40 hrs. - Class 4.5 Approximate Repeat None Seam Slippage Warp N/A Railroaded No Fill: N/A FLAMMABILITY

  • California Fire Code Technical Bulletin 117, Section E Passes CS-191-53 Passes

  • 1200-oberonBlack.jpg
    1201-rheaGray.jpg

    Black Oberon

    Rhea Gray

    1203-callisto.jpg
    1204-titanBlue.jpg

    Callisto Earth Tone

    Titan Blue

    1207-hyperion.jpg
    1208-europa.jpg

    Burgundy Hyperion

    Europa Green

    Spice Fabric Group

    ELEMENTS 50% Polyester, 50% Post Industrial Recycled Polyester - Reduced Environmental Impact TECHNICAL SPECIFICATIONS PERFORMANCE TEST METHOD RESULTS Width 54" Abrasion ASTM-D-3597 (Cotton Duck) 150,000 Double Rubs Weight N/A Colorfastness Dry: N/A Backing Polyurethane Wet: N/A Finish N/A Lightfastness AATCC 16E 40 hrs. - Class 4.5 Approximate Repeat None Seam Slippage Warp N/A Railroaded No Fill: N/A FLAMMABILITY

  • California Fire Code Technical Bulletin 117, Section E Passes CS-191-53 Passes

  • Juniper-Spice.jpg
    Mint-Spice.jpg

    Juniper Spice

    Mint Spice

    Nutmeg-Spice.jpg
    Paprika-Spice.jpg

    Nutmeg Spice

    Paprika Spice

    Pepper-Spice-temp.jpg
    Sesame-Spice.jpg

    Pepper Spice

    Sesame Spice

    Foot Ring Assembly and Adjustment
    Turn_Style_Foot_Ring.jpg
    Prep: Clean Cylinder, Loosen Foot Ring Gasket

    Before Assembly: Clean the cylinder thoroughly to remove any grease or oil to provide a good grip. In the loosened position, check to see that Foot Ring is at the top of the central hub by holding onto the black inner gasket and turning the foot ring counter clockwise. (Tip: The inner gasket needs to be loose so you can fit the foot ring over the chair cylinder.)

    Footring-illust-1.jpg
    footring-illust-2.jpg
    Assembly: Put Foot Ring On Chair Cylinder

    Slide the chair height cylinder into the center opening of the foot ring. Insert the thicker part of the cylinder into the five star base. Insert the thinner part of the cylinder into the chair mechanism attached to the bottom of the chair seat. To engage the pressure seal, sit on the chair and adjust the seat height up and down.

    footring-illust-3.jpg
    Adjust: Height Of Foot Ring

    Hold the plastic inner hub (gasket) of the Foot Ring while you tighten or loosen it. (Tip: If needed, grip the bottom of gasket below foot ring with a cloth and channel locks so you can get a better grip.) Once the Foot Ring is loosened you can move it to the desired height to support the user's legs. Set the height so the user's legs are parallel to the floor or as close as possible. Now you can tighten the Foot Ring. Hold the base with one hand and turn the Foot Ring clockwise to tighten. You may need to hold the bottom of the hub (the black inner gasket) as you turn the Foot Ring in order to get a very tight fit. It is best not to over tighten the Foot Ring

    footring-illust-4.jpg
    footring-illust-5.jpg
  • Write Review

    This product hasn't received any reviews yet. Be the first to review this product!