Additional Information

Site Information

  • Image 1

Mesh High Back Chair, Headrest, Simple Function, Seat Depth

$938.00 $539.00
(You save $399.00)
SKU:
707SSHHRMESHN
Quantity:
  • Over the top Mesh Ergonomic Chair...Rocking Comfort and Headrest for those High Powered Meetings!

    Stretch, work, take a power nap or rest your head while on those mongo teleconference meetings. Day in and Day out meetings require movement, at least from your Mesh High Back Chair, with the ultimate headrest, you can. Order yourself some added comfort and movement with our smooth rocking High Back Mesh Conference Chair.

    This chair is excellent for people with longer backs. Features include: seat depth adjustment, 3 way stretch mesh back, that suspends and supports you in comfort, and the added headrest. Our tension adjustment sets up this chair for safe rocking. Our Model 707HSSHHRMESHN is highly recommended as a comfortable high back conference chair with a headrest. To your comfort and your health! With or without arms.

    • Easy adjustable headrest for positioned comfort
    • Seat depth adjustment for leg support
    • 3 way Stretch Mesh back
    • Safe Rocking Tension Adjustment
    • 3.5 thick, exclusive Smart Memory foam contoured seat
    • True waterfall front seat eliminates unhealthy leg compression
    • Pneumatic seat height and optional cushioned Arm Rests, with height & depth adjustments
    • Cozy knit upholstery (high abrasion resistance-250,000 double rubs)
    • Back Size 19 w x 24 ht Seat 20.5 w x 18 to 21 d, Adjustable Height 17- 22
    • Capacity 250 pounds

  • Fitting People To Computer Chairs
    Chair Height:

    Begin adjusting chair with feet flat on the ground so that people can easily go through all adjustments. Feet must be flat on the ground. The feet, knees, and hips must be slightly higher/equal to a 90-degree angle.

    portrait-Woman-Seated-LCD-lg.jpg
    Proper Seat Depth:

    Two to four fingers space between the back of the knee and the front of the chair provide proper thigh support and will help to prevent varicose veins and increases blood circulation. (A proper seat depth helps alleviate any back muscles from pulling or adding body tension to the back while seated.) Remember to re-seat people after each adjustment. (This method will always guarantee a best fit after any adjustment.)

    Back Height Adjustment:

    Full contact with the low back is key to a comfortable fit. An easy way to locate the low back area is to place the palm of your hand at your waist, fingers facing down, along the spine at the center of the back. General location is between your waist and hips.

    Welcome To The Small Of Your Back!

    Lower the chair back so that there is full contact and support for the lower back.

    The goal of getting a chair with a higher back is to make sure that you get as much contact with the seat back as possible for as many of your daily tasks as possible. Notice what part of your back you feel supported and at what point your back leaves the chair back.

    When desiring a higher back chair, make sure the upper area of the chair provides full contact without rounding the shoulders. To self assess the best fit, use a long mirror so that you can look at the relationship of your body to the chair including: hips and knees, how much of the seat is being used, how high your shoulder might be from placement of arm height, and how much of your back is being supported.

    Back Angle Adjustment:

    You may want the back angle to be in a more casual, open position for tasks such as meetings and telephone calls, while computer entry and paper work may be best suited for a more "formal" or upright chair position. Again, the goal is to get as much of the back supported during each task.

    Lumbar Adjustment:

    Ideally, the ability to increase or decrease the lumbar adjustment can take the chair comfort level up several notches. If low back pain is an issue, the lumbar adjustment may be of major importance.

    Seat Rocking:

    Another key adjustment is the ability to rock. You want to feel safe and secure in your chair while rocking, and at the same time it needs to be a fluid, easy movement. Tightening or loosening the tension adjustment can be the difference between relaxing in your chair, feeling stiff in your chair and really having to work your back muscles to get any back movement (loosen adjustment) or feeling that the chair rock is out of control and you feel like you may keel over (tighten adjustment).

    Seat Tilt:

    Using the seat is a good solution to alleviate lower back discomfort, especially while doing longer stints at the keyboard or completing paperwork. A slight angle may be all you need. This will take the pressure off the tail bone and distribute the body weight to your sitz bones and re-align your spine from your tail bone to the top of your head.

    You will notice that your shoulders relax and you may experience it easier to breathe (an important thing to do during the business of the day). When seated with the tilt, be sure and raise your seat height one half to one inch. This will take the pressure off your thighs and then reseat yourself.

    A more radical angle may work well for you, even though some people feel they are sliding out of the chair. It's good to experiment with positioning, but above all, listen to your body. Again, when seated with the tilt, be sure and raise your seat height one half to one inch. This will take the pressure off your thighs and then reseat yourself.

    Arm Height:

    The arm rest height should be set so you feel even pressure on your forearm rather than prominent pressure at the wrist area or elbow area. The shoulder should be at a relaxed position-not too high so that it is pushed up into your ears and not too low so that it is pulling at the muscles in your neck. Ideally, the forearm should be at a 90-degree angle from the shoulders to the chair arm.

    Chair Casters:

    Standard casters for chairs are carpet casters. If you are on a hardwood or cement floor, consider cement casters for the least marking up of the wooden floor. There are also breaking casters and chair glides for special needs seating.

    Mesh Back Color Skirts 901, 706, 707 series
    5300Echo-Park-Black-200.jpg
    5301Sawtelle-Silver-200.jpg

    Black Echo Park

    Silver Sawtelle

    5302Silver-Lake-Gray-200.jpg
    5303Topanga-Brown-200.jpg

    Gray Silver Lake

    Brown Topanga

    5304Palisades-Blue-200.jpg
    5305Malibu-TealBlue-200.jpg

    Dark Blue Palisades

    Teal Blue Malibu

    5306DelRay-Orange-200.jpg
    5307Sunset-Red-200.jpg

    Orange Del Ray

    Red Sunset

    5308JoshuaTree-Green-200.jpg

    Green Joshua Tree

    Basic Fabrics For Kare Ergonomic Office Chairs
    Basic Fabric Group

    BASIC 100% Marquesa Lana TECHNICAL SPECIFICATIONS PERFORMANCE TEST METHOD RESULTS Width 54" Abrasion ASTM-D-4157 (Wyzenbeek-Cotton Duck) 250,000 Double Rubs Weight N/A Colorfastness Dry: N/A Backing Acrylic Wet: N/A Finish Teflon Lightfastness AATCC 16E 40 hrs. - Class 4 Approximate Repeat None Seam Slippage Warp N/A Railroaded No Fill: N/A FLAMMABILITY

  • California Fire Code Technical Bulletin 117, Section E Passes CS-191-53 Passes

  • Black-1020.jpg
    Blue.jpg

    Basic Black

    Basic Blue Combo

    Burgandy.jpg
    Charcoal.jpg

    Basic Burgundy

    Basic Charcoal

    Gray.jpg
    basic-navy-N04L.jpg

    Basic Gray

    Basic Navy Blue

    Celestial Fabric Group

    50% Polyester, 50% Post Industrial Recycled Polyester - Reduced Environmental Impact TECHNICAL SPECIFICATIONS PERFORMANCE TEST METHOD RESULTS Width 54" Abrasion ASTM-D-3597 (Cotton Duck) 150,000 Double Rubs Weight N/A Colorfastness Dry: N/A Backing Polyurethane Wet: N/A Finish N/A Lightfastness AATCC 16E 40 hrs. - Class 4.5 Approximate Repeat None Seam Slippage Warp N/A Railroaded No Fill: N/A FLAMMABILITY

  • California Fire Code Technical Bulletin 117, Section E Passes CS-191-53 Passes

  • 1200-oberonBlack.jpg
    1201-rheaGray.jpg

    Black Oberon

    Rhea Gray

    1203-callisto.jpg
    1204-titanBlue.jpg

    Callisto Earth Tone

    Titan Blue

    1207-hyperion.jpg
    1208-europa.jpg

    Burgundy Hyperion

    Europa Green

    Spice Fabric Group

    ELEMENTS 50% Polyester, 50% Post Industrial Recycled Polyester - Reduced Environmental Impact TECHNICAL SPECIFICATIONS PERFORMANCE TEST METHOD RESULTS Width 54" Abrasion ASTM-D-3597 (Cotton Duck) 150,000 Double Rubs Weight N/A Colorfastness Dry: N/A Backing Polyurethane Wet: N/A Finish N/A Lightfastness AATCC 16E 40 hrs. - Class 4.5 Approximate Repeat None Seam Slippage Warp N/A Railroaded No Fill: N/A FLAMMABILITY

  • California Fire Code Technical Bulletin 117, Section E Passes CS-191-53 Passes

  • Juniper-Spice.jpg
    Mint-Spice.jpg

    Juniper Spice

    Mint Spice

    Nutmeg-Spice.jpg
    Paprika-Spice.jpg

    Nutmeg Spice

    Paprika Spice

    Pepper-Spice-temp.jpg
    Sesame-Spice.jpg

    Pepper Spice

    Sesame Spice

  • Write Review

    This product hasn't received any reviews yet. Be the first to review this product!